A loose faucet, a dripping spout, or a handle that no longer turns cleanly can turn a simple sink into a daily annoyance. If you are replacing a worn fixture or fitting a new one, the job needs careful removal, sound connections, and a neat finish.

Oh Really O'Reilly Plumbing helps homeowners and landlords across Leinster, Ireland with faucet installation that suits the sink, the pipework, and the way the space is used. We turn up ready to assess the setup, fit the new faucet, and leave the area clean and ready for use.


When a new faucet helps

Some faucets show clear signs that replacement makes more sense than another repair. A tired fitting can waste water, stain the sink, and make everyday tasks more frustrating than they should be. A new installation is often the cleaner choice when the old unit is worn, mismatched, or no longer worth repairing.

Common reasons people ask us to fit a new faucet include:

  • Constant dripping from the spout or base
  • Stiff handles that are hard to turn
  • Loose fittings that move when used
  • Visible corrosion, staining, or worn seals
  • A design change during a kitchen or bathroom update
  • Replacement after a leak has damaged the old fitting

If the faucet is part of a wider sink update, we can work with the existing layout and keep the installation practical for daily use.


What we fit

Faucet installation is not just a matter of attaching a new tap and hoping for the best. The sink type, existing pipework, mounting holes, and access below the basin all affect how the work is done. We look at what is already there, then fit the new faucet with attention to alignment, sealing, and final testing.

Kitchen fittings

Kitchen faucets often need to suit a busy sink area, with enough reach for washing up and enough clearance for day-to-day use. We install fittings that sit neatly and connect cleanly to the existing supply lines.

Bathroom fittings

Bathroom faucet installation may involve compact basins or tighter access under the sink. We make sure the fixture sits squarely and the connections are secure, so the finished result looks tidy and feels solid.

Replacement swaps

If you are changing an old faucet for a newer one, we can remove the existing fitting and set the new one in place without leaving the surrounding area untidy. This is especially useful when the old tap has seized, leaked, or left the base stained.


How the visit works

We keep the process straightforward so you know what is happening from start to finish. When you contact Oh Really O'Reilly Plumbing, we arrange a time that suits the property and the job. On arrival, we inspect the sink area, check the supply connections, and confirm what is needed before beginning the installation.

  1. Inspect the setup
    We look at the sink, tap holes, access space, and existing pipework before removing anything.
  2. Remove the old fitting
    If there is an existing faucet, we disconnect it carefully and clear away worn seals or fixings.
  3. Fit the new faucet
    We position the new unit, secure it, and connect the supplies with care.
  4. Test the work
    We run water through the faucet, check for leaks, and make sure the handle action feels right.
  5. Leave it tidy
    We clean the work area and make sure the sink space is ready for normal use.

That simple approach helps avoid messy finishes and reduces the chance of small connection issues being missed.


Signs the job needs care

Some faucet replacements are straightforward, while others need a closer look. A quick fitting can become more involved if the old tap has been in place for years, if access is tight, or if the sink holes do not match the new fixture. Taking the time to assess the situation first helps avoid rushed work and a poor result.

Access matters

Under-sink space can be cramped, especially when pipework sits close to the basin or cabinet walls. We work carefully in those conditions so the new faucet is secured without damage to nearby fittings.

Matching the sink

Some sinks suit a single-hole faucet, while others need a different arrangement. We check the layout before installation so the new fixture sits correctly and looks balanced.

Old connections

Existing supply lines and fixings can be worn, stiff, or awkward to remove. We deal with those connections methodically so the new installation starts from a sound base.


Why a tidy install matters

A faucet can look fine from above while still having problems below the sink. Loose nuts, poor sealing, or strained connections can lead to nuisance leaks and premature wear. A careful installation helps the faucet feel secure and keeps the sink area easier to maintain.

At Oh Really O'Reilly Plumbing, we focus on the practical details that matter after the installer has left. That means checking the seating, confirming the handles move as they should, and making sure the area around the base is neat.

Good installation also helps the faucet suit the rest of the room. A well-set fixture can make a kitchen or bathroom look finished rather than patched together.


Aftercare tips

Once your faucet is installed, a little attention goes a long way. The aim is not to fuss over it, but to keep an eye on the first few uses and notice anything unusual early.

  • Check under the sink after the first few runs of water
  • Wipe the base dry after use if the area tends to stay wet
  • Use the handles gently during the first few days
  • Look for movement at the base or around the connections
  • Report any drip, looseness, or odd noise before it becomes a bigger nuisance

If you are also planning a sink update or a broader bathroom refresh, it can be sensible to handle the faucet at the same stage so the finished space feels consistent.


Leinster appointments

We carry out faucet installation for homes and rental properties across Leinster, Ireland. Whether the job is a straightforward replacement or part of a planned upgrade, we aim to make the visit smooth and practical.

Oh Really O'Reilly Plumbing works from 123 Waffle Street and can be reached on +0123456789 or shitscreek@hotmail.com for booking enquiries. We keep weekday hours from 09:00 to 17:00, Monday through Friday, so you can arrange a visit during normal working hours.

If you want a faucet fitted with care, clear communication, and a clean finish, we are ready to help.


Common questions

Can you install a faucet for a kitchen sink?

Yes. We fit kitchen faucets and check that the new fixture suits the sink layout and existing connections.

Do you remove the old faucet first?

Yes. If there is an existing fitting, we remove it carefully before installing the replacement.

What if the new faucet does not match the sink holes?

We assess the sink arrangement before starting and explain whether the chosen faucet suits the space.

Can you fit a faucet during a bathroom update?

Yes. Faucet installation is often part of a bathroom refresh, and we can work with the existing setup or a newly updated sink area.

Will you check for leaks after the installation?

Yes. We test the faucet after fitting it and check the connections for leaks before we finish.

Do you work on rental properties?

Yes. We provide faucet installation for homeowners, landlords, businesses, and property managers across Leinster, Ireland.

Clean finished bathroom with polished fixtures and open space.

Get Started

Book Plumbing Help You Can Count On

Tell us what is happening with your plumbing or heating system. We will help you find the right fix, from small repairs and leak detection to boiler work, bathroom updates, and ongoing maintenance.